longer and stronger
Designed for flexibility, the 6-section, 42.8 feet to 200.1 feet, hydraulic boom features a single cylinder telescoping design with pinning system. All sections fully extend/retract automatically and can be locked in the selected working position.
The main boom is complemented by a bi-fold jib with offsets up to 40°. Jib length of up to 105.0 feet is possible with two 23.0 foot optional lattice inserts.
Max. lifting capacity:
160 ton @ 8 ft
Boom:
42.8 ft – 200.1 ft
6 section, single cylinder with pinning system
Jib:
33.8 ft/ 59.1 ft Bi-fold Offsets up to 40°
Optional 11.8 ft Heavy Lift Jib Offsets up to 40°
Optional lattice inserts – 2 pcs @ 23’ each
Max. lifting height:
302 feet
Maximum radius:
220 feet
Request now
Fill out the contact form and look forward to receiving more crane information.
Smarter Features
The processes and parts that make the GTC-1600 so effective include self-erecting counterweights, two-stage carbody jacks with remote control, and tool-free track frame removal and handling; these all streamline the time from truck to task for greater efficiency and cost savings. This 160-ton crawler delivers on ‘stronger’ too, utilizing market-leading load charts for slopes up to 4º degrees. The patented OPTI-WIDTH™ system always provides the maximum available lifting capacity in all working conditions.
The GTC-1600 also offers out-of-level operation up to 4° slopes and automatic load chart switching. And, this crane’s positive control with power limiting hydraulic system allows for travel, extend tracks, telescope boom and winch operation all at the same time.
Auto Switching 0.5°, 1.5°, 2.5° & 4.0° slope load charts
Work zones with soft stop
Versatility
The GTC-1600 has higher, longer capabilities for lift work, while also enabling out-of-level and pick-and-carry work. It is well-suited for rental use, as well as for a variety of construction and specialty lift work applications.
HEAVY CIVIL
The GTC-1600 has higher, longer capabilities for lift work, while also enabling out-of-level and pick-and-carry work. Those strengths work well on projects with structures, bridges, barriers, retaining/sound walls, concrete buckets, tilt work and railways.
ALTERNATIVE ENERGY
Wind farms are getting bigger and bigger, and the GTC-1600 has the ability for major lifting and can serve as a support crane to a giant lattice machine on the projects. It also excels with the difficult ground conditions these jobs can present.
MARINE
The GTC-1600 is valuable for projects on or near the water, or in a confined space. With no outriggers to deploy, this crane can work in a smaller footprint. Also, charts are available for working on barges.
POWERLINE WORK
Tadano teleboom crawlers have been a go-to machine for transmission and distribution construction for years. Whether it’s the 200-foot boom or the ability to operate successfully on challenging terrain, the GTC-1600 is a perfect fit for power.
OIL AND GAS INDUSTRIES
From general lifts to assisting with the build and/or breakdown of different rigs, the GTC-1600’s reach can provide a ton of value on oil/gas projects.
STEEL ERECTION
Many projects to construct bigger buildings have a congested job site and limited work space. The ability of the GTC- 1600 to reach 200 feet while also operating in a confined area makes this machine perfect for steel erection on new structures.
MAXIMIZED DRIVETRAIN
Equipped with a dual certified US EPA Tier 4F/Euromot Stage V Cummins B6.7 diesel engine rated 326 hp @ 2,200 RPM, the GTC-1600 offers powerful performance with a max torque of 1,014 lb-ft @ 1,500 RPM. Engine throttle control is achieved by auto-idle control, adaptive throttle manual, manual potentiometer control or by foot pedal control. The travel system features 2-speed track drives with maximum speeds of 1.6 mph and a maximum unladen gradeability of 52%.
KEY ENGINE SPECIFICATIONS:
• 6-cyclinder, water-cooled, 4-cycle
• Aspiration: Turbocharged and Aftercooled
• Piston Disp: 6.7 L
• Alternator: 70 amp (24V DC electrical system)
