The AC 5.250-2 is equipped with remarkable capabilities, allowing it to handle heavy loads efficiently. With a three-sheave hook block, it can effortlessly lift weights of up to 67.3 tonnes. Additionally, it accommodates a 5.8-meter heavy-lift runner, all while operating within a 12-tonne axle load configuration.

The AC 5.250-2 is equipped with remarkable capabilities, allowing it to handle heavy loads efficiently. With a three-sheave hook block, it can effortlessly lift weights of up to 74.2 tons. Additionally, it accommodates a 19-foot heavy-lift runner, all while operating within a 13.2-ton axle load configuration.

One of the remarkable features of this crane is the inclusion of transportation mounts for the HAV extension as part of the 12-tonne axle load configuration. This ensures that you have the necessary equipment for your lifting tasks. Moreover, the AC 5.250-2 allows for a payload of several hundred kilograms at the rear end, enhancing its versatility.

One of the remarkable features of this crane is the inclusion of transportation mounts for the HAV extension as part of the 13.2-ton axle load configuration. This ensures that you have the necessary equipment for your lifting tasks. Moreover, the AC 5.250-2 allows for a payload of several hundred kilograms at the rear end, enhancing its versatility.

The AC 5.250-2 is designed to come with comprehensive equipment as standard right out of the gate, not to mention that all new cranes in the Tadano AC family will benefit from the same equipment effective immediately.

The corresponding features include the innovative IC‑1 Plus crane control system, for example. This system determines the crane’s maximum lifting capacity for every boom position as a function of the superstructure’s slewing angle, and in real time to boot. As a result, the crane is always able to take advantage of the maximum lifting capacity available to it – especially during lifts over the outriggers. In other words, the feature literally provides the greatest support when it comes to lifts in which the outriggers are not fully extended and the counterweight is reduced. All in all, the AC 5.250-2 benefits from this tremendously, as its outriggers can be extended asymmetrically to 0, 25, 50, 75, and 100 percent positions.

The new AC 5.250-2 makes a compelling case when it comes to its engine, a state-of-the-art Mercedes-Benz unit with an output of 522 hp and a maximum torque of 2,600 Nm that provides solid propulsion and powerful lifting capacities. And it goes without saying that the HVO-compatible diesel engine meets the latest EU Stage V requirements. In addition, it is particularly cost-effective thanks to its Eco Mode, which ensures that the engine always outputs the exact amount of power that the crane actually needs at any one time, with the IC-1 crane control system taking care of the corresponding calculations. In addition, the crane also has a fuel-saving start-stop feature on board, with the system turning off the crane engine at the press of a button but without deactivating the control software.

A true game-changer in lifting capacities. With an impressive 10 to 15 percent increase over previous best values, and up to 30 percent higher with certain configurations, our crane stands out in its class.

Experience the power of the AC 5.250-2 with its exceptional lifting capacities. It effortlessly lifts 14.5 tonnes with a 70-meter boom length at a radius of 12 to 24 meters, surpassing all competition. At a radius of 42 meters and a boom length of 47 meters, it lifts 11 tonnes, ranking among the best.

Experience the power of the AC 5.250-2 with its exceptional lifting capacities. It effortlessly lifts 16 tons with a 229.6-ft boom length at a radius of 39.4 to 78.7 feet, surpassing all competition. At a radius of 137.8 feet and a boom length of 154.2 feet, it lifts 12.1 tons, ranking among the best.

But that’s not all. Our crane boasts a system length of up to 112 meters, with a 70-meter main boom that can be extended by an additional 42 meters using our HAV main boom extension. Plus, all main boom extensions from 5.8 to 36 meters are self-rigging for enhanced efficiency.

But that’s not all. Our crane boasts a system length of up to 367.5 feet, with a 229.6-ft main boom that can be extended by an additional 138 feet using our main boom extension. Plus, all main boom extensions from 19 to 118.1 feet are self-rigging for enhanced efficiency.

The AC 5.250-2 features six cameras that keep everything in view. With the help of a computer-assisted diagram, this makes it possible to graphically show the possible extension lengths for the outriggers and the counterweight tailswing radius on the display in the carrier cab. This makes it significantly easier to position the crane at job sites. And Tadano Surround View also helps on the way to the site by making it easier for crane operators to notice pedestrians and cyclists when turning.